TFE Ø5.0

9321184TFE50-Impianto-conico-esagono-esterno-Ø5,0_6---xgraf.jpg

Conical External Hex Ø5.0

TFE5007 for height of 7 mm.
TFE5085 for height of 8.5 mm.
TFE5010 for height of 10 mm.
TFE5011 for height of 11.5 mm.
TFE5013 for height of 13 mm.
TFE5015 for height of 15 mm.

Platform Ø5 mm, implant Ø5 mm, hexagon 2.7 mm.
The coronal part features micro-threading, which has the aim to reduce bone reabsorption, therefore optimizing long-term performance.
The implant is self-taping and easy to insert thanks to its apical incisions, which also guarantee considerable anti-rotational properties.

Straight abutment

Cod. TCFEMD502 - H2
Cod. TCFEMD504 - H4
Cod. TCFEMD506 - H6

Angled abutment 15°

Cod. TCFEMA15°502 - H2
Cod. TCFEMA15°504 - H4
Cod. TCFEMA15°506 - H6

Angled abutment 25°

Cod. TCFEMA25°502 - H2
Cod. TCFEMA25°504 - H4
Cod. TCFEMA25°506 - H6

Castable abutment

Cod. TCFECA50N

Rotating castable abutment

Cod. TCFECA50R

Non-rotating provisional abutment

Cod. TCFEMP50N

Rotating provisional abutment

Cod. TCFEMP50R

Ucla titanium base abutment with cannula

Cod. TCFEUC50N

Ball abutment

Cod. TCFEMS501 - H1
Cod. TCFEMS502 - H2
Cod. TCFEMS503 - H3
Cod. TCFEMS504 - H4

Ball abutment cap

Cod. MSCAP01

Stainless box for ball abutment cap

Cod. MSCON01

Transfer pick-up techinque

Cod. TCFETR50

Transfer pull-up technique

Cod. TCFETRST50

Transfer screw

Cod. TCFEVTRST

Analogue for implant Ø5,0

Cod. TCFEAN50

Healing screw

Cod. TCFEVG502 - H2
Cod. TCFEVG504 - H4
Cod. TCFEVG506 - H6

Pick-up transfer screw

Cod. TCFEVPL

Prosthetic screw with torx connection

Cod. TCFEVPR

Drill extension

Cod. TPRFR

Lanceolate drill

Cod. TFRLANC

Cylindrical drill

Cod. TFRC20

Drill for conical connection implant Ø3,25

Cod. TFRF32

Drill for conical connection implant Ø4,0

Cod. TFRF40

Fresa per impianto conico Ø5,0

Cod. TFRF50

Conical threadformer Ø5,0

Cod. TFEIMS40

Short hand driver

Cod. TDR12C

Long hand driver

Cod. TDR12L

Driver for hand and ratchet

Cod. TCR12L

Micromotor driver for mounter and treahdformer

TCONTR

Parallelism indicator

Cod. TIND

Depth gauge

Cod. TMPRF

Mounter blocking key

Cod. TCHBM

Dynamometric ratchet

Cod. TDINA

Ball abutment driver

Cod. 771CEF

STOP TFRC20

Cod. TSTOPC20XX
(07/85/10/11/13/15)

STOP TFRK35

Cod. TSTOPC35XX
(07/85/10/11/13/15)

STOP TFRF40

Cod. STOP45XX
(07/85/10/11/13/15)

STOP TFRF50

Cod. STOP50XX
(07/85/10/11/13/15)

Surgical sequence Ø 5.0

For the correct insertion of the conical external hexagon Ø 5.0 implant, we recommend following the surgical protocol:

1. Use the lanceolate drill (TFRLANC) up to the marking (recommended n. revs = 800 rpm).
2. Use the 2 mm start-up drill (TFRC20) with the appropriate stop of the same height as the implant being inserted (recommended n. revs = 800 rpm).
3. Insert the parallelism indicator and check for any disparallelism.
4. Use the conical drill Ø 3.25 (TFRF32) with the appropriate stop (recommended n. revs = 200-400 rpm).
5. Use the final drill Ø 4.0 (TFRF40) with the appropriate stop (recommended n. revs = 200-400 rpm).
6. Use the final conical drill Ø 5.0 (TFRF50) with the appropriate stop (recommended n. revs = 200-400 rpm).
7. In the case of D1 bone density, use the threadformer (TFEIMS50).
8. Insert the implant. Recommended n. of revs 15-25 rpm.
9.Close with the screw cap included in the package.