Monophasic With Equator Attachment Ø3.8

TSEQ3810 for height of 10 mm
TSEQ3812 for height of 12 mm
TSEQ3814 for height of 14 mm

Equator cap

Cod. EQCAP01

Inox box for equator cap

Cod. EQCON

Drill extension

Cod. TPRFR

Lanceolate drill

Cod. TFRLANC

Cylindrical drill

Cod. TFRC20

Drill for monophase implant Ø3,3 - Ø3,8

Cod. TFRMF38

Parallelism indicator

Cod. TIND

Depth gauge

Cod. TMPRF

Stop for drill for monophase implant

Cod. TSTOPMFXX
(06/08/10/12/14/16)

Driver for monophase implant with Equator connection

Cod. TCREQ

Surgical sequence of monophasic Equator Ø 3.8 implant

For the correct insertion of the monophasic Equator Ø 3.8 implant, we recommend following the surgical protocol:

1. Use the lanceolate drill (TFRLANC) up to the marking (recommended n. revs = 800 rpm).
2. Use the 2 mm start-up drill (TFRC20) with the appropriate stop of the same height as the implant being inserted (recommended n. revs = 800 rpm).
3. Insert the parallelism indicator and check for any disparallelism.
4. Use the Ø 3.3 - Ø 3.8 drill (TFRMF38) with the appropriate stop (recommended n. revs = 200-400 rpm).
5. Insert the implant. Recommended n. of revs 15-25 rpm.