Cod. TSKMD15 - H1,5
Cod. TSKMD30 - H3,0
Cod. TSKMA152 - H2
Cod. TSKMA153 - H3
Cod. TSKMA252 - H2
Cod. TSKMA253 - H3
Cod. TSKCRCO
Cod. TSKCRCOR
Cod. TSKCATI
Cod. TSKMPN
Cod. TSKMPR
Cod. TSKMF
Cod. TSKTI
Cod. TSKTIR
Cod. TSKSCB
Cod. TSKMS1 - H1
Cod. TSKMS2 - H2
Cod. TSKMS4 - H4
Cod. MSCAP01
Cod. MSCON01
Cod. TSKCAM
Cod. TSKVPR
Cod. TSKVPT
Cod. TSK001 - H1
Cod. TSK002 - H2
Cod. TSK003 - H3
Cod. TSK173 - H3
Cod. TSK174 - H4
Cod. TSK303 - H3
Cod. TSK304 - H4
Cod. TSK100001
Cod. TIS900002
Cod. TIS100222
Cod. TIS100003
Cod. TPOMFA
Cod. TSKTR
Cod. TSKTRSH
Cod. TSKVTR
Cod. TSKTRST
Cod. TSKVTRST
Cod. TSKAN35
Cod. TSKVG2 - H2
Cod. TSKVG4 - H4
Cod. TSKVG6 - H6
Cod. TSKVG452 - H2
Cod. TSKVG454 - H4
Cod. TSKVG456 - H6
Cod. TSKVG552 - H2
Cod. TSKVG554 - H4
Cod. TSKVG556 - H6
Cod. TIS900003
Cod. TIS900004
Cod. TIS900001
Cod. TIS100304
Cod. TPRFR
Cod. TFRLANC
Cod. TFRC20
Cod. TFRK35
Cod. TFRK40
Cod. TFRK48
Cod. TFRKC35
Cod. TFRKC40
Cod. TFRKC48
Cod. TSKDR
Cod. TFIINS
Cod. TDR12C
Cod. TDR12L
Cod. TDR12CT
Cod. TDR12LT
Cod. TCR12L
Cod. TIND
Cod. TMPRF
Cod. TDINA
Cod. TCRMFA
Cod. 771CEF
Cod. TSTOPC20XX
(07/85/10/11/13/15)
Cod. TSTOPC35XX
(07/85/10/11/13/15)
Cod. TSTOPC34XX
(07/85/10/11/13/15)
Cod. TSTOPC42XX
(07/85/10/11/13/15)
For the correct insertion of the Ti Smart Ø 5.0 implant, we recommend following the surgical protocol:
1. Use the lanceolate drill (TFRLANC) up to the marking (recommended n. revs = 800 rpm).
2. Use the 2 mm start-up drill (TFRC20) with the appropriate stop of the same height as the implant being inserted (recommended n. revs = 800 rpm).
3. Insert the parallelism indicator and check for any disparallelism.
4. Use the conical drill (TFRK35) with the appropriate stop (recommended n. revs = 200-400 rpm).
5. Use the conical drill (TFRK40) with the appropriate stop (recommended n. revs = 200-400 rpm).
6. Use the final conical drill (TFRK48) with the appropriate stop (recommended n. revs = 200-400 rpm).
7. In the case of D1 bone density, use the cortical drill (TFRKC48) up to the black laser marking (recommended n. revs = 200 rpm).
8. Insert the implant using the drivers (TSKDR/TSKINS). Recommended n. of revs 15-25 rpm.
9. Close with the screw cap included in the package.